Product Information

Firestone Waterbased Adhesive is used to adhere the EPDM membrane to a timber substrate only.

2.5 litre        8 – 10m2     

5 litre           16 – 20m2   

10 litre            32 – 40m2    

Please stir adhesive prior to application.

Firestone water-based adhesive is used to bond the EPDM to a timber substrate only. Do not allow adhesive to freeze.

Preparation

Make sure that all bonding surfaces are clean, dry and smooth. Areas must also be free of any sharp edges or loose and foreign materials, including oil, grease and other continents.

Application

Stir adhesive prior to application and use a roller to apply evenly onto the timber substrate. Membrane should be installed immediately and positioned whilst the adhesive is still wet.

Open the membrane out as soon as possible to allow it to settle.

On hot days, apply small sections of water-based glue and immediately cover with the membrane. This will prevent the glue from drying prematurely.

Do not use in freezing conditions or if frost is forecast within 24 hours.

Firestone Product Code: W56-RAC-7037